Plasma Cutter Machine

Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm


Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm

Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm    Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm
Expert customer service in 9 languages. Plasma Cutter - 120 A - 400 V - 45 mm. 120 A / 400 V. Outstanding performance-120 A at 60% DC, 93 A at 100%. Proven-contactless ignition by means of high frequency. Powerful-cutting depths up to 45 mm, depending on the metal. Control-clear control panel with LCD display. Do you have a question?

The S- CUTTER 120C plasma cutter by Stamos Power2 is the perfect device for cutting metallic materials. The plasma cutting device has special features, such as a powder-coated sheet steel casing and first-class cutting quality. With a cutting depth of up to 45 mm, the plasma cutter helps take care of demanding repair and renovation tasks as well as for efficient use in production. At a switch-on time of 60%, the cutting current is 120 A, which can be regulated between 30 and 120 A. The high performance is made possible by the particularly reliable IGBT inverter technology.

Use the plasma cutter by Stamos Power2 for maximum power. High-performance plasma cutter with 5 m hose package. The S-CUTTER 120C plasma cutter by Stamos Power. Is the perfect device for cutting metallic materials.

It has ample power reserves for cutting thick metallic materials using air plasma. The plasma cutting device has special features, such as a powder-coated sheet steel casing, high economy and first-class cutting thickness. S-CUTTER 120C-sophisticated welding technology combined with a high cutting performance.

With a cutting depth for carbon steel of up to 45 mm, the plasma cutter helps take care of demanding repair and renovation tasks as well as for efficient use in production or workshops. At a switch-on time of 60%, the cutting current is 120 A. With a working range between 30 and 120 A, the Stamos Power. Provides the necessary flexibility in choosing the cutting current. All values are accurately displayed on the LCD display.

The high-frequency ignition operates in a contact-free and extremely reliable manner. For an optimal cutting kerf, the machine has a gas post flow time of 10 s. The air cleans the kerf and prevents contamination during the cutting at the same time as the cutting torch cools.

The plasma cutter by Stamos Power. Works with a 400 V three-phase operating voltage and cuts workpieces from a wide variety of metallic materials.

Low and high-alloy steels are just as important as the non-ferrous metals aluminium, copper and titanium. The plasma cutter offers a high degree of freedom of movement with a 5 m long plasma hose and the 3 m long grounding cable. The power unit of the plasma cutting device is protected against damage by fan cooling and overheating protection. The cutting torch is cooled by the compressed air. The powder-coated steel casing reliably protects the technology in the device, a handle facilitates the transport of the plasma cutter. Allow yourself to be convinced by high quality and excellent service-order a plasma cutter from Stamos Power² today! Cutting current at 100 % DC. Cutting current at 60 % DC. 65,00 x 40,00 x 58,00 cm. 75 x 50 x 68 cm. IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode.

This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity.

IGBTs are a further development of MOSFET technology. Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm². This device works with a 3-phase connection (400 V +/- 10 %). A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation. Start the weld by placing pressure on the torch button. Stop the process by releasing the button. By pressing the torch button the solenoid valve opens. Allowing the gas to flow in.

The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current.

The welding process stops once you press the burner button again. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside. Shows the welding / cutting parameters. The LED light indicates overheating or a malfunction.

Plasma cable assembly with torch (5 m). The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices.

No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range.

We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals!

The item "Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm" is in sale since Tuesday, December 14, 2021. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".

kingdom" and is located in Berlin. This item can be shipped to United Kingdom.

  1. Brand: Stamos
  2. MPN: S-CUTTER 120C
  3. EAN: 4062859007872
  4. Shipping weight: 42.8 kg
  5. Shipping dimensions (LxWxH): 75 x 40 x 68 cm
  6. Weight: 37 kg
  7. Dimensions (LxWxH): 65 x 40 x 58 cm
  8. Item Lenght: 65 cm
  9. Item Height: 40 cm
  10. Item Width: 58 cm
  11. Model: S-CUTTER 120C
  12. Burner cooling: Gas Cool
  13. CNC: no
  14. Cooling: AF
  15. Duty cycle for 40°C [%]: 60
  16. Efficiency [%]: 85
  17. Gas after-flow [s]: 10
  18. Ground cable [m]: 3
  19. Input power [kVA]: 18.2
  20. Insulation class: F
  21. IP Protection class: IP21S
  22. Manual: yes
  23. Max cut current [A]: 120
  24. Max cutting thickness [mm]: 45 (for Carbon steel)
  25. Max. input current [A]: 27.8
  26. Max. input power [kVA]: 19.4
  27. Min cut current [A]: 30
  28. Norm Compliance: EN61558-1/EN61558-2-16
  29. Open circuit voltage [V]: 340
  30. Plasma cable [m]: 5
  31. Power cord [m]: 3
  32. Power factor: 0.93
  33. Rated Input current [A]: 18.1
  34. Ignition Plasma: 1
  35. Voltage [V]: 2
  36. Water cooling: no
  37. Welding current at 100% duty cycle [A]: 93
  38. Welding current at 60% duty cycle [A]: 120


Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm    Plasma Cutting Machine Plasma Cutter 120 A 60% Duty Cycle Metal Cutting 45 mm