Plasma cutting machine 55-amp with 230-volt dual-voltage DC inverter cutting mac

  
PlC55P is a new machine modified and upgraded on the basis of CUT50P. Using more high-quality IGBT transistor materials can save 30% of energy. Pilot arc plasma cutter dual voltage 110/220V available, dual frequency 50/60HZ, duty cycle 60% at 55 Amps. Max Rated Clean Cut Thickness: 1/2 Inch(12mm). Max Severance Thickness: 2/3 Inch(15mm). Pilot arc plasma cutter efficiently cuts through rough, painted, and rusty surfaces. Cutting Material: stainless steel, alloy steel, mild steel, copper and aluminum etc.

The gas adopts harmless air to protect the environment and health. Newly Remodelled and Upgraded Non-touch Plasma Cutting Machine - PLC55P. Equipped with an upgraded version of P80 plasma cutting torch. The design is ergonomic, and the handle is equipped with a press protection switch. Stable arc initiation, smooth cutting, less spattering.

Non-contact plasma cutter for efficiently cutting a wider range of metals, e. Through rough, painted, rusted, oiled and other metal surfaces.

It can effectively improve the cutting efficiency. The arc is stable, the cut shape is flatter and the life of the consumables is greatly increased. Effectively Cut All Kinds of Metals. It can effectively cut various metals such as carbon steel, stainless steel, iron, aluminium and aluminium alloys. The cutting shape is flat, forming at one time, reducing metal loss.

Large-capacity Capacitor and Heat Dissipation Device. Industrial-grade large capacitors provide more stable current regulation. The separately equipped heat dissipation device can greatly improve the heat dissipation efficiency. Improve the service life of the machine.

All Copper Transformer and arc starter. The all-copper amorphous transformer is used to provide a more stable output voltage for a more stable cut current. The all-copper ignition arc makes the cutting arc more stable. High temperature resistant for long working hours and durability. Adopt the latest IGBT transistor module design, it can work for a long time.

IGBT transistor design, more intelligent control of machine work, can effectively save 50% of energy. The IGBT transistor design reduces the installation of large-volume parts, making the body lighter and more convenient. Independent ventilation design system, together with the radiator, enhances the cooling capacity of the machine. Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection and lack of compressed air pressure protection. Ground Clamp & cable 1. Air filter & regulator 1 (adjusts 0 145psi). If you have any questions, please feel free to contact me. 55Amp Pilot Arc Plasma Cutter Machine. Dimension: 12.6" X 6" X 8.3 (321521 CM). Clean Cutting Thickness: 12mm (1/2).

Duty Cycle: 60% at 55Amps, 100% at 30 Amps.