Plasma Cutter Machine Metal Cutting Machine 70A 400V Pilot Arc Air Cooled

Expert customer service in 9 languages. Plasma Cutter - 70 A - 400 V - pilot arc. Cutting current: 20 - 70 A. Cutting capacity up to 20 mm. 60 percent duty cycle at 70 A. Easy-to-read LED display for precision and reproducible results. Ergonomic torch with P31 Softgrip coating. Integrated pressure reducer with pressure gauge. Robust and durable thanks to coated sheet steel housing. Maximum power yield through V-MOSFET inverter technology with 93 percent efficiency. Do you have a question? The S-Cutter 70-3HP plasma cutter from Stamos Power offers energetic support when cutting metallic materials.

It is equipped with powerful V-MOSFET inverter technology and performs a wide variety of tasks in automotive workshops, metal processing companies and in industrial production. In the DIY sector, it supports ambitious DIY enthusiasts in their repair and renovation projects. S-Cutter 70-3PHhigh efficiency thanks to proven V-MOSFET inverter technology With a duty cycle of 60 percent, the basic unit of the plasma cutter delivers a cutting current of 70 amperes.

At 100 percent duty cycle, it delivers 52.4 amperes. The cutting current can be continuously varied between 20 and 70 amperes on the control unit.

This covers the entire performance range, which enables the cutting of low.. S-Cutter 70-3PH-high efficiency thanks to proven V-MOSFET inverter technology.

With a duty cycle of 60 percent, the basic unit of the plasma cutter delivers a cutting current of 70 amperes. This covers the entire performance range, which enables the cutting of low- and high-alloy steels as well as aluminium, copper, titanium and other non-ferrous metals.

The LED display and the rest of the control unit provide an overview of the performance values. Both the cutting current and the air pressure can be preselected precisely and steplessly via rotary knobs. In this way, the optimum performance values can be set for every area of application. Depending on the metal, the plasma cutter can reach a cutting depth of up to 20 mm. You can connect an external compressor via the included compressed air hose. The required working pressure is 4 to 5 bar at an air flow rate of 235 litres per minute. You can set the air pressure values using the integrated pressure reducer on the easy-to-read control unit and check them on the dial gauge. The 5 metre-long plasma hose and 3 metre-long grounding cable ensure plenty of freedom of movement. The ergonomic torch with P31 Softgrip coating ensures comfortable operation and fatigue-free work. The pilot arc can be started directly at the cutting torch via high frequency. Whether in an extensive renovation or in industrial production, metal work is often a rugged affair and the tools and machines used must be correspondingly robust.

For this reason, the power unit of the cutter is housed in a coated sheet steel housing , which guarantees both functional efficiency under difficult working conditions and a long service life. The base unit is fitted with a powerful fan for cooling to prevent any problems from overheating.

However, if the operating temperature does experience a sudden, unwanted increase, it will trigger the overheat protection. This guarantees that the operating temperature is maintained and that the device has a long service life. Allow yourself to be convinced by high quality and excellent service-order a plasma cutter from Stamos Germany today! 400 V / 3 phases. Cutting current at 100 percent duty cycle.

Cutting current at 60 percent duty cycle. 48,00 x 20,00 x 35,00 cm. 60 x 28 x 48 cm.

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency!

The welding current is very stable and thus ensures a perfect weld. Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm². This device works with a 3-phase connection (400 V +/- 10 %).

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside. Shows the welding / cutting parameters. The LED light indicates overheating or a malfunction.

The LED lights to indicate that the network connection of the phase has failed. Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure. The following accessoires can be used for the Plasma Cutter S-CUTTER 70 3PH by Stamos Power. Plasma Spare Parts Set - S-CUTTER 70.

The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices. No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range. We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals!

The item "Plasma Cutter Machine Metal Cutting Machine 70A 400V Pilot Arc Air Cooled" is in sale since Monday, April 8, 2019. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".kingdom" and is located in Berlin. This item can be shipped to United Kingdom, Ireland.

Brand: Stamos Welding
MPN: S-CUTTER 70-3PH
EAN: 4260223027321
Shipping Weight: 20.900 kg
Shipping Measurements (LxWxH): 60.000 x 28.000 x 48.000 cm
Weight: 14 kg
Measurements (LxWxH): 48 x 20 x 35 cm
Model: S-CUTTER 70 3PH
Item Number: 2128
Rated Input Voltage: 400 V, 3-Phase(s)
Input Frequency: 50/60 Hz
Rated Input Current: 10,6 A
max.
Input Current: 13,8 A
Rated Input Power: 6,8 kVA
max. Input Power: 9 kVA
No-load Voltage: 251 V
Cutting Current: 20 70 A
Duty Cycle: 60%
Cutting Current at 100% Duty Cycle: 54,2 A
Cutting Current at 60% Duty Cycle: 70 A
Ignition: HF High Frequency
Cutting Strength: 20 mm
Cutting Width: 1,2 mm
Air Flow: 235 l/min
Air Pressure: 4,5 bar
Length Cable Package: 5 m
Length Earth Cable: 3 m
Length Power Cable: 2 m
Device Cooling: Aeration
Item Type: Plasma Cutter