Plasma cutter Dnipro-M CUT-40 6400 W Universal CUTTING Machine 50 Hz IP21S 9.5kg

  

Plasma cutter Dnipro-M CUT-40 6400 W Universal CUTTING Machine 50 Hz IP21S 9.5kg. Maximum power consumption 6400 watts. Thickness of a cut of ferrous metals: pure / rough 10/15 mm. Cutting current, min-max 15-40 A. The minimum volume of air supply is 130 l / min.

Working pressure 4,5-5,5 MPas. The maximum input current is 28 A. Rated input current 16.5 A. Output voltage of idling 290 V.

Rated operating voltage 96 V. Gas delay time 5-10 sec. Blowing time after cutting 12 sec.

Operating cycle, PV at 40 ° C, cutting current 40 A 35%. Operating cycle, PV at 40 ° C, cutting current 30 A 60%. Operating cycle, PV at 40 ° C, cutting current 24 A 100%. Power factor, cos f 0.6. The method of excitation of the arc is high-frequency, touch.

Type of forced air cooling. Mains voltage 220 ± 15% (1 phase). Reinforced hose for connecting compressed air (4 m) is available. Cable with clamp weight (length 3 m-copper 16sq. Plasmatron RT 31 (sleeve assembly, length 6 m) is available.

Collars for a hose of connection of air of 2 pieces. The union for connection of compressed air is. Plasma cutter Dnipro-M CUT-40 tool is widely used in. Production of details with rectilinear and figured contours. Cutting holes or slots in the metal. Production of blanks for welding. Processing of edges of forgings. Cutting of pipes, strips, rods and profiles. Fast and clean metal cutting. Fast and clean metal cutting up to 10 mm thanks to a maximum current of 40 Amperes.

Plasma cutter Dnipro-M CUT-40 can cut ferrous and non-ferrous metals. Maximum possibilities of plasma cutting. The maximum thickness of a separate cut makes 15 mm that is ideally suited for rough cutting of sheet materials and dismantling works.

Thanks to smooth and exact regulation of current strength, the Dnipro-M CUT-40 plasma cutter is capable to carry out exact figured cutting of sheet metals of small thickness (from 0,5 mm), and thanks to low (in comparison with a cutting zone) heating temperature, the detail is not deformed and keeps the geometric shape. Plasma cutter provides fast cutting of both thin and thick metals. For example, the data of the cutting time of the steel sheet at a maximum current of 40A for a length of 10 cm. 4 mm thick - 12 sec. 7.5 mm thick - 26 seconds.

9.5 mm thick - 30 sec. 14 mm thick - 56 sec. Plasma cutter has protection against overload and overheating, which guarantees its reliability and durability with active and daily use. And the metal case reliably protects electronics from hit of foreign objects and blows during transportation. All electronics are protected from dust, high humidity and condensate, which ensures the operation of the plasma cutter in the conditions of all-season use in production and everyday life.

Implemented protection of connectors from dust and metal chips extends their service life. The length of the plasmatron is 6 m, which provides a wide working area without moving the device.

A high pressure hose with a length of 4 m allows you to separate the plasma cutter from the zone of air injection. The cutting current regulator and the working air pressure sensor are located on the front panel of the case, which is convenient for changing and controlling the settings during operation. The plasma cutter is equipped with the handle which facilitates transportation and movement of the device on a working zone. The extended complete set of a plasma cutter includes all necessary accessories and expendables: a plasmatron, an air hose, the union and 2 collars for its connection, a cable with a clip of weight, and also spare electrodes and nozzles (4 pieces).

This allows you to immediately perform the necessary work without additional costs. The item "Plasma cutter Dnipro-M CUT-40 6400 W Universal CUTTING Machine 50 Hz IP21S 9.5kg" is in sale since Saturday, July 25, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "vosul" and is located in Lutsk. This item can be shipped worldwide.

1. Country/Region of Manufacture: Ukraine
2. MPN: 82941000
3. Brand: Dnipro-M
4. Item Type: Plasma Cutter