Plasma cutter Cutting machine up to 45mm SHERMAN 130 CNC Machine torch 400V 3PH

  

CNC PLASMA CUTTER WITH MACHINE TORCH 9m. SHERMAN CUTTER 130 CNC is a powerful device dedicated for CNC cutting table however it can also be used for a hand cutting if equipped with handheld torch. Device is built using inverter IGBT technology what provides better efficiency and less power consumption.

It is supplied from a three phase 400 volt electric net that ensures stable and uninterrupted operating. Cutting power range from 30A to 125A allows to cut material thickness up to 45mm depending on material type whether it is steel, aluminium or copper alloys. The plasma is ignited with a blow back ignition system what allows for easy ignition and limits extensive consumables wear like it happens in case of HF plasma ignition. Additionally the lack of HF plasma ignition allows to use other electronic devices close to plasma cutter by eliminating high frequency electromagnetic interference. Plasma cutter has a 60% duty cycle what means that it can be used at full power for six minutes until it stops to cool down for 4 minutes and than resets and start to operate again.

Power source SHERMAN CUTTER 130 CNC. Plasma torch IPXM 120 - 9m.

Three phase power supply plug. Cutting steel, aluminium and copper. Power supply from 400V three phase electric. Cutting thickness up to 45mm.

AC / 3 x 400V / 50/60Hz / 3ph (three phase). 100% (93A) / 60% (125A). 4.6 - 5.5 bar (0,46 - 0,55 MPa). 68 × 45 × 61 cm. In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. We deliver all over Europe. You can be sure your parcel arrive on time. Our professional customer service team is here for you seven days a week. You will be provided with the best customer service so you won't walk away unsatisfied. The item "Plasma cutter Cutting machine up to 45mm SHERMAN 130 CNC Machine torch 400V 3PH" is in sale since Tuesday, October 13, 2020.

This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "allweld" and is located in Rzeszów. This item can be shipped worldwide.

1. Model: CUTTER 130 CNC
2. Modified Item: No
3. Country/Region of Manufacture: Poland
4. Custom Bundle: No
5. Item Type: Plasma Cutter
6. Unit Quantity: 1
7. Plasma ignition: Blowback (reduced electrode wear)
8. Gas postflow: YES
9. Weight: 41
10. Dimensions: 68 × 45 × 61 cm
11. Bundle Listing: No
12. Power supply: AC / 3 x 400V / 50/60Hz / 3ph (three phase)
13. Cutting current: 30A - 125A
14. Maximum cutting thickness: 45mm
15. MPN: SINW-CUTTER130C
16. Duty cycle: 100% (93A) / 60% (125A)
17. Output voltage: 128V
18. CNC TABLE READY: YES
19. Power consumption: 20 kVA
20. Supply air pressure: 4.6 - 5.5 bar ( 0,46 - 0,55 MPa )
21. Unit Type: Unit
22. Supply air flow: 295 l/min
23. Torch type and lenght: IPXM 120 / Machine / 9 m
24. 2T / 4T: YES / YES
25. Input Amperage: 30 amps
26. Brand: SHERMAN