Expert customer service in 9 languages. Plasma Cutter - 40 A - 230 V - 20 mm - power generator. Durable-60% duty cycle at 36 A and 100% at 30 A. Powerful-cuts with 40 A metals up to 20 mm maximum. Flexible-optimal freedom of movement with 4 m long cables.Modern-IGBT inverter technology with HF ignition. Safe-fan cooling and robust casing.
Do you have a question? The S-Cutter 40PFC Plasma Cutter is the perfect device for cutting metallic materials. The plasma cutter has modern IGBT inverter technology and can be used to perform a wide variety of tasks in automotive workshops, metalworking plants and industrial production.The plasma cutting device has a cutting current of 40 A. At 100% duty cycle, 30 A are provided. The cutting current can be seamlessly adjusted between 20 and 40 A with the controller. The power is sufficient to cut carbon steel and stainless steel with a depth of up to 20 mm.
The power factor correction (PFC) enables the device to operate with different voltages from 90 V to 270 V. Cut metal quickly and with high-quality cutting edges with Stamos Power2!
The plasma cutter up to 40 A can also be used with a power generator. The S-Cutter 40PFC plasma cutter by Stamos Power. Is the perfect device for cutting metallic materials. The power factor correction (PFC) enables the device to operate with different voltages from 90 V to 270 V, so you can also use the plasma cutter with power generators.
The durable plasma cutting device for workshops and production. The plasma cutter separates aluminium with a thickness of up to 16 mm, copper up to 12 mm. A rapid cutting speed is thereby achieved. The plasma arc is reliably and stably ignited at high frequency.
For an optimal cutting kerf, the compressed air has a follow-up time of 10 s. The air cleans the kerf and prevents contamination during cutting at the same time as the cutting torch cools. The 4 m long plasma hose and the 3 m long grounding cable ensure a lot of freedom of movement.During extensive renovation work and industrial production, the robust steel casing proves to be reliable protection. A built-in fan cools the appliance in the event of strong heat development during operation.
If the temperature nevertheless reaches a critical point, the overheating protection switches on. A sturdy handle makes for a comfortable transportation of the device.
The plasma cutter has a power factor correction (PFC). Even unstable current sources of 90 to 270 V, as can occur with a current generator, are therefore reliably compensated. As a result, the device is particularly flexible and can be used, for example, on construction sites.
Duty cycle at 40 °C. Cutting current at 100 % DC. Cutting current at 60 % DC. 20 mm (carbon steel, stainless steel), 16 mm (aluminium), 12 mm (copper). 50,50 x 13,00 x 28,00 cm.
54 x 26 x 36 cm. IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode.This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology. Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.
This device works with a 1-phase connection (230 V +/- 10 %). A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point. This is the time taken from the moment of pressing the torch button to that of the electric arc igniting. During this process the solenoid valve opens and the released gas pushes the oxygen from the gas lines and in doing so, forms a protective atmosphere for the arc.The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation. The time taken by the output power to rise to that of the welding current's value. The time taken of the output welding current to lower to that of the terminal current. This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding. The frequency of impulses during pulse mode. Start the weld by placing pressure on the torch button. Stop the process by releasing the button. By pressing the torch button the solenoid valve opens. Allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside. Shows the welding / cutting parameters.
Plasma cable package with burner 4 m. The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices.
No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range. We are proud to use exclusively the best materials in our machines.
Go for the brand products by the Stamos Welding Group and weld like professionals! The item "Plasma Cutter CNC Plasma Cutting Machine Metal 40A 230V 20mm 60% Duty Cycle" is in sale since Wednesday, February 24, 2021. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".kingdom" and is located in Berlin.
This item can be shipped to United Kingdom, Ireland.