75 front U disk interface, convenient for program transfer? 75 system upgrade adopts U disk upgrade method, which is convenient, simple, practical, and provides lifetime upgrade service? 75 supports system backup and system restore functions. The system restore can restore the operating system alone or restore Factory status? 75 All functions and processes of the entire system are slightly upgraded online, eliminating the after-sales worry?
75 can be split or all import and export processing files? 75 Parameter backup and parameter restoration? 75 supports 4 modes: oxygen gas, plasma, powder spraying and demonstration? 75 category processing parameters are complete, can meet the needs of different processes? 75 Oxygen gas and plasma IO are controlled separately?75 Oxygen gas automatic height adjustment, two-stage preheating, three-stage perforation? 75 Plasma arc voltage feedback, positioning feedback, automatic turning off arc voltage height adjustment? 75 suffixed with T controller, its own integrated arc voltage height control function (THC)? 1.75 Built-in plasma arc voltage automatic/manual height adjustment function: can display the actual arc voltage and set arc voltage, set arc voltage Increase the parameters, detect collision/positioning success signal, arc starting signal control, positioning test? 75 Plasma arc voltage control supports two closed arc voltage height adjustment methods of speed and distance, which makes the machine tool more stable. 75 supports edge cutting, which can reduce preheating time for thicker steel plates?
75 Real-time acceleration and deceleration during movement? 75 According to the thickness of the steel plate, the speed can be automatically limited at the corner to effectively prevent overburn? 75 Manually select the starting line or select the perforation point? 75 dynamic/static processing graphics display, graphics zoom in/out, dynamic tracking of cutting points in zoomed state?
75DSP high-speed, advanced interpolation control, high-speed operation, stable operation, low noise? 75 arbitrarily set the starting speed, the lifting speed? 75 has power failure, breakpoint protection memory function? 75 The ``cutting size'' function can avoid the waste of the plate caused by the wrong layout calculation? 75 can set different management permissions and corresponding passwords to protect the rights and interests of equipment manufacturers?75 supports P2P mode or BCD (8421) and serial RS232 mode remote control? 75 supports laser point function? 75 supports plasma dynamic perforation function? 75 Processing piece counting, running time, perforation times and other information statistics Technical index: 1 Number of control axes: 2-axis linkage (three-axis or four-axis can be customized) 2 Control accuracy: ±0.001mm 3 Coordinate range: ±99999.99mm 4 Maximum pulse frequency: 200KHz; Maximum operating speed: 15m/min 5 Maximum number of program lines: 80,000 lines 6 The largest program: 4M 7 Time resolution: 10ms 8 System working power: DC + 24V DC power input, power is greater than 80W. 9 System working environment: temperature -10? Relative humidity 0-95% non-condensing 10 Maximum power of driving arc voltage height adjustment motor: 45W (Note: only with T system).
If you need volume work Rate, optional up to 200W. System interface: a DB15 core male two-axis motor drive interface b DB25 core female head 16-channel photoelectric isolation output, the maximum reverse current is 300mA c DB25 core male connector 16-channel photoelectric isolation input, maximum input current 300mA d Built-in USB interface on the front panel, convenient for users to transfer cutting code e Extended IO input and output port; PWM input port; analog input port f Optional standard DB9 core male serial port RS232 interface The following interfaces are only available for F2000 series CNC systems with "T": g The arc voltage input divider ratio is selected instead of 1:50 or 1:100 h 5-core arc voltage height adjustment motor output and limit input port i 7-core arc voltage and positioning input, arc starting signal output port Hardware Configuration: 1. Display: 7 inch 800 480 high resolution 16 million colors color high brightness LCD screen 2. User program space: 256M 4. Main frequency: 400MHZ system main frequency 5.USB: USB1.1 interface front end, supports at least 16GB USB flash drive. Keyboard: PCB film keyboard 7. Chassis: The all-steel structure is completely shielded, which can truly prevent electromagnetic radiation, anti-interference, and anti-static.