HITBOX 220V 55Amp HF Touch Pilot Arc Air Plasma Cutter Inverter Cutting Machine

  

HITBOX Plasma Cutter 55 Amp HBC5500 1/2 Clean Cut Air Plasma Pilot Arc Digital 220V High Frequency Inverter Machine Cutting for Copper Alloy Mild Steel Aluminum. 1, Automatic 220V DC Dual Voltage 50A output 60% Duty Cycle Air Plasma Cutter. 2, Max Rated Clean Cut Thickness: 1/2(14mm).

3, Cutting Material: Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome. 4, Conversion line easy transfer from 220V Home Use, Air Pressure 50-60PSI. UPGRATED CUTTING MACHINE - 55 AMP PLASMA CUTTER Automatic 220V DC 55A output 60% duty cycle air plasma cutter. On 240V Carbon steel Max Rated Clean Cut Thickness: 1/2(12mm). Max Severance Thickness: 3/5(15mm).

32A plug, circuit breaker requires more than 30A. HIGH EFFICIENCY & ENERGY SAVING - HITBOX cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch; greatly makes the cutting consumables more endurable COMPACT DESIGN & WIDELY APPLICATIONS - HITBOX plasma cutter has a handle for portability. It is perfect for perfect for home DIY and general repairing work.

Ideal for both home garages and workshops. It can be use for stainless steel, alloy steel, mild steel, copper, cast iron, chrome, etc. MADE OF HEAVY-DUTY MATERIAL - The solid material construction makes it reliable and to be used for a long time. With protection of electro circuit against over current, over voltageand low-voltage. Safety in operation is assured. 1Plasma Cutter 1Earth Cable 1Pt31 Cuting Torch 1Air Hose 1Consumables. How to connect the air compressor. 1 Seal the connection of the copper gas fitting and the "IN" terminal and "OUT" terminals.

2 Connect the regulator seal to the installation place of the regulator. 3 Install the regulator bracket to the two screws at the top of the back of the machine.

4 Remove the mounting ring from the top of the regulator and install the regulator to the mounting bracket and re-attach with the ring. 5 Release the gas valve, modulate the pressure of the gas to stipulated pressure and press the button. 6 The gas pressure is 4 times normal atmospheric pressure. 7 In case that the water-filtering bottle is full of water, remove the water.