Humanization design all the key switch, comfortable and convenient. By the special motor control chip DSP core control system, DSP control the motor so that the cutting process is more stable and reliable. DSP motion control algorithm for the optimization and upgrade in the original F2200, to make the machine run more smoothly and reliably, prolong the life of electrical and mechanical parts. System features: - Chinese / English menu system, Chinese English French interface of one key switching. 45 kinds of commonly used graphics library (including the grid graphics), can choose the set piece size and pore size.
Supports EIA code (G code) and FastCAM, FreeNest, IBE, Wentai, PM2000 and other kinds of nesting software - Compact keyboard type design, make more comprehensive manual input file - Graphic proportion, rotation, mirror - Graphics can be arranged in a matrix arrangement, interaction, stacked arrangement - Workpiece with slotted size of original size and at the same time display, intuitive and convenient - Graphic plate correction, arbitrary edges of plate can be used as a correction boundary - Can customize the types of all input and output ports (normally closed or open) and number - Self diagnostic system for all IO and key state, convenient examination and troubleshooting - The pre U disk interface for convenient program transmission - Using U disk upgrade system, which is convenient and simple, practical, lifetime free upgrades - All functions can be upgraded online as a whole. Can import and export single or all processing files Backup or restore parameters: - Supporting oxygen gas, plasma, dusting and demonstrates modes - All kinds of machining parameters is complete, which can meet different process requirements - Oxygen gas and plasma IO separate control - Oxygen gas automatic height adjustment, two stage preheating, three level perforation - Plasma arc voltage feedback, position feedback, automatic closing high pressure arc angle - Control supports the speed and distance of two shut down arc voltage mode l plasma arc pressure, make the machine more balanced, safe - Supports edge-cutting, the preheating time can be reduced for thick steel board - Acceleration, deceleration of speed during the motion.According to the thickness of the steel plate, speed will be automatically controlled in the corner, effectively preventing over-burning. Manually select the start line or wear a hole. Dynamic / static processing graphics, graphics zoom in / out, dynamic tracking cutting point under magnification - DSP high speed, high precision interpolation control, high-speed operation, smooth running, low noise - Set the start speed, acceleration and deceleration time with content - Power off protection, breakpoint memory protection - "offset cutting" function can avoid calculation errors, saving the materials. Management authority and the corresponding password can be set to maintain management rights - Remote control of before and after, left, right and cutting movement, as well as start and stop function.
Can be used for advertising plasma cutting machine, - Walking frame function, - Choice of the starting point. Technical Indicators: - Axis: 2 (can be customized for three axis) - Control precision: ± 0.001mm - Coordinate range: 99999.99mm - The maximum pulse frequency: 200KHz; maximum speed: 15 m / min. Maximum program line number: 150000 - Largest single program: 6M - Time resolution: 10ms - Power supply: DC +24V DC power input - System working environment: temperature -10 degree celsius to +60 degree celsius; relative humidity 0-95% no condensation System interface: - 15 core male two motor drive interface - 25 core female head 16 photoelectric isolation output, the maximum reverse current 300mA - 25 core male 16 isolated inputs, the maximum input current 300mA - Front panel built-in USB interface, convenient user transmission cutting code - Extension of IO input and output; PWM input port of the analog input port; Hardware configuration: - Display: 7 inch high resolution 800480 16000000 color high brightness LCD screen - Memory: 2 64MSDRAM - User space program: 256M - 200MHZ system clock frequency - USB:USB1.1 interface front - Keyboard: electronic PCB film keyboard - Case: whole steel structure completely shielded, can really achieve anti electromagnetic radiation, anti-static, anti interference Package List: - 1 x Laser flame cutter F2100B 2 axis CNC controller. Usually it cost about 35USD-50USD. The item "F2100B 2-Axis CNC Controller for CNC Plasma Cutting Machine Laser Flame Cutter#" is in sale since Tuesday, February 19, 2019.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "thanksbuyer-hobby" and is located in ShenZhen. This item can be shipped worldwide.