Expert customer service in 9 languages. Plasma Cutter - 60 A - 400 V. PRO Series - Cable: 8 m. Cutting current: 20 - 60 A. 400 V high voltage current.
Exact current thanks to the seamless adjustment of the cutting current. High-powered ventilation for efficient cooling.
Cost-effective with inexpensive pressurized air. Compact, mobile construction, versatile applications. Jump-start-function, even during the gas post-flow. Do you have a question? The expert for craft supplies, Stamos Germany, offers first-class plasma cutters as well as welders.
The Pro-range has been developed with inverter technology and is the best choice for maximum energy savings. In workshops, in agriculture and car repair shops, you need a cutting unit that is robust, flexible and reliable.
The mobile plasma cutter S-Plasma 60P combines these features. Coated or rusted materials can be easily handled.
All you need is a rotary current and pressurized air. Cut through steel as if it was butter - with the plasma cutter S-Plasma 60P from Stamos Germany The plasma cutter is perfectly suited for precisely cutting stainless steel, cast iron, copper, brass and other electroconductive metals of up to 20 mm thickness. It generates a light arc with very high tempera.. Cut through steel as if it was butter - with the plasma cutter S-Plasma 60P from Stamos Germany. The plasma cutter is perfectly suited for precisely cutting stainless steel, cast iron, copper, brass and other electroconductive metals of up to 20 mm thickness.It generates a light arc with very high temperatures which allows you to cut through thick steel as if it were butter. The cutting current of the plasma cutter S-Plasma 60P is adjustable between 20 and 60 amps, which means that the device is adaptable to all conditions. First-class cutting quality, separation cuts and precision. Even at the more difficult end parts you get perfect cuts, thanks to the high reserve capacity. This high quality allows for better results with less reworks. Saving time and working efficiently is becoming more and more important. Use your time in an effective manner - with the plasma cutter from Stamos Germany.
The cutting speed is high , which ensures precise and high-quality weld seams with minimal material waste. The device has a jump-start-function which allows you to start it even during the gas post-flow.Easy to use, even under difficult circumstances. Adjust the strength of the current to your needs.
The seamless adjustment of the current is effected with a simple and practical rotary knob. You can change the parameters quickly and easily, without needing to remove your protective gloves. Even in bad lighting conditions, you can always see the display clearly.
As protection against overheating, the plasma cutter has a high-powered ventilation system that cools the device during operation. During a prolonged use, overheating might occur.
This will be indicated with a control/warning light. Keep an eye on the lamp to stay safe.
Energy efficiency - Expensive plasma gas is a thing of the past. The device is powered by 400 volts.
You can also use a generator with a minimum power output of 8 kVA for mobile operation. The plasma cutter is powered with inexpensive pressurized air. You need a compressor with a pressure of ingoing air of 6.2 bar and a passage of air of 170 l/m. This is best achieved with a 10-bar-compressor. The construction stands out for its compact, robust design and its low tare weight of only 24.8 kg.The plasma cutter can be easily transported. The air-cooled cutting unit has a powder-coated sheet steel casing. The plasma cutter has an 8 m ground cable. You can work on a large scale without being hindered by a short cable. The device will be delivered without a high current connector! Cutting current at 100% DC. Cutting current at 60 % DC. 54,00 x 37,00 x 20,00 cm. 72 x 30 x 41 cm. The welder is equipped with a MOSFET transistor.
This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency!
The welding current is very stable and thus ensures a perfect weld. Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface.
Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection. On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².This device works with a 3-phase connection (400 V +/- 10 %). Start the weld by placing pressure on the torch button. Stop the process by releasing the button. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside. Shows the welding / cutting parameters. The LED light indicates overheating or a malfunction. Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure. Ground cable with clamp (8 m). The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices. No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range. We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals!
The item "Cutter 60 Amp Welder Welding Machine Tig Inverter Pulse Plasma Arc Mma" is in sale since Wednesday, May 19, 2021. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".kingdom" and is located in Berlin. This item can be shipped to United Kingdom, Ireland.