Arc Plasma Cutter Machine Non-Touch Pilot 50-Amp 260-Volt Electric Alloy Steel. Included: Additional Tips, Hose, Kit, Tips, Torch. Maximum amperage output (amps): 50. Minimum amperage output (amps): 15. Tools Product Type: Power Tool.
CUT-50HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20 Amp to 50 Amp Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CUT-50HF Air Plasma Cutter cuts a thickness of 3/5 in.
And the maximum severance thickness is 1.0 in. Specifications, Type: Non-touch Pilot Arc Plasma Cutter, Supply Power: 95-Volt to 260-Volt, 50 Hz/60 Hz, 1-Phase. Rated Input Current: 230-Volt/37 Amp and 115-Volt/40 Amp, Cutter Current Range: 230-Volt/50 Amp and 115-Volt/30 Amp, Nominal DC Open Circuit Voltage: 280-Volt, Output Voltage: 100-Volt, Duty Cycle 104â°F (40â°C): 60% at 50 Amp. Efficiency: 89%, Power factor: 0.93, Output Terminal Type: Direct Wire, Cooling Method: Fan Air Cooled, Gas Supply: Clean Dry Oil-Free Air, Gas Pressure Range: 30 psi to 90 psi, Recommended Gas Inlet Flow: 4.5 scfm at 90 psi, Maximum Severance Cutting Thickness: 1.0 in.
Movement Speed: 12.5 in. Net Weight: 24.8 lbs. Product Size: 19.0 in.Package Weight: 34.4 lbs. Plasma Cutter Torch Gun Assembly, 10 ft. 300 Amp Work Clamp Assembly, 230-Volt to 115-Volt Power Adapter, Air Filter and Pressure Gage (Installed inside the machine), Owners Manual.
Incorporates advanced Non-touch Pilot Arc Cutting technology, with an excellent arc stability, very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster. Can cut up to 3/5 in. Stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes. 95-Volt to 260-Volt wide voltage, 50 Hz/60 Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction, it requires less work to produce an overall better result with a cleaner cut.Quick setup: NPT 1/4 in. Industry type D coupler can connect easily with the pre-installed plug on the air compressor, the filter is located inside the machine with an automatic air control solenoid valve.
Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, power cords extend to 700 ft. These products are manufactured according to the specifications of the US Electrical Standards and codes and voltage. Please note the Use with a converter or other voltage transforming device is AT YOUR OWN RISK. Customer service is our top priority!Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us.
If ordering electrical items outside of the U. Please note that they will come equipped with a standard U.You will need a suitable adapter to use the item in your country. An adult signature will be required.
Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition.We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received.
For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. The item "Arc Plasma Cutter Machine Non-Touch Pilot 50-Amp 260-Volt Electric Alloy Steel" is in sale since Tuesday, March 10, 2020.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "pfcwills" and is located in Flushing, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.