45Amp Non-Touch Non-HF Pilot Arc Air Plasma Cutter 220V Cutting Machine

  

AIXZ Plasma Cutter, Non-Touch Pilot ARC AIC45II 45Amps DC Air Plasma Cutting Machine 220V Digital Plasma Cutter Clean Cut 16mm. : Low-frequency plasma cutting machine has low electromagnetic interference, easier arc starting and higher cutting success rate, no interference with the power supply, and is harmless to human health. : The Non-touch pilot arc technology allows cutting without touching the tip of the knife to the metal. It also has better cutting performance which efficiently cuts rough, rusty surfaces and produces minimal slag, better cut quality and longer consumable life.

This plasma cutting equipment with stable and mature IGBT inverter technology. This cutting machine power 50/60HZ, 60% duty cycle, 15-45A DC output, 1/2" ideal clean cut and 3/4" maximum severance cut under 220/240V. LCD Digital Display & 2T/4T? : You can adjust the current and cutting mode according to the LCD digital display and read the air pressure value more easily. Using 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. : Our updated plasma cutter is compact, shaped and lightweight with an easy carry handle. Dimension:179.88.6inch, Weight:11.2pounds.

It is suitable for the home DIY hobby, repair work, metal processing, site work, etc. Notice: Our products have been professionally tested at the factory. 1x Plasma Cutter 1x Power Cable 1x Plasma Cutting Torch 1x Ground Clamp 1x User Manual.